Templates Detail
Last updated
Last updated
A Template is a way to control all settings for a Network Group. Basically a linked Network Group will inherit all values from a template.
A Template offers the following:
Controls initial settings at network creation
Best template is matched using the Beacons and the right template is selected as follows:
Fastest Beacon, so any Template that matches the Beacon Id.
We then match the best list of Templates using Latency and Bandwidth.
2Pint has provided many out-of-the-box templates which represents settings for various scenarios. At the "Templates" page, select the edit button next to any template to view and adjust settings.
The table below lists all of the settings available within a template.
| Setting | Description / Options | Editable |
|---|---|---|
Id | The GUID which is assigned to the template. | No |
Description | A description of the template. | Yes |
Date Added | The date and time in which the template was created. | No |
Networks on this group is directly routed | Options:
| Yes |
| Setting | Description / Options | Editable |
|---|---|---|
Type of network | Options:
| Yes |
Internet breakout | Options:
| Yes |
Throttling of bandwidth | 4 Mb/s (Mbs) | Yes |
Max bandwidth (downstream) | 0 b/s (Not set) | Yes |
Target bandwidth by % | 0 | Yes |
Separate throttling of internet bandwidth | 0 b/s | No |
Well connected DO bandwidth | 0 b/s | No |
Well connected BITS bandwidth | 0 b/s | No |
Non-leader DO bandwidth for regular networks | 256 Kb/s | Yes |
Non-leader BITS bandwidth for regular networks | 256 Kb/s | Yes |
| Setting | Description / Options | Editable |
|---|---|---|
Beacon | FQDN of Beacon server | Yes |
Measure vs template values | Options:
| Yes |
Automatic bandwidth tuning | Options:
See this page for more information about bandwidth tuning. | Yes |
LEDBAT target bandwidth | 0 b/s | Yes |
| Setting | Description / Options | Editable |
|---|---|---|
Disable BranchCache | Options:
| Yes |
Set BrancheCache to Local mode only | Options:
| Yes |
Server Secret | <Enter the server secret> | Yes |
Set LEDBAT++ on BITS Uploads | Options:
| Yes |
Set BranchCache to local mode on Wifi | Options:
| Yes |
Force distributed mode | Options:
| Yes |
Force Hosted Cache Mode | Options:
| Yes |
Set BranchCache to use port 1337, 1338, 1339 | Options:
| Yes |
Manage cache sizes | Options:
| Yes |
Cache options set (change via WMI) | 10 GB for disks 128 GB and less, 10% for 250-500 and 50 GB for 480+ | No |
Disable GreenLeader for clients on wired networks | Options:
| Yes |
Always use Green Leader(s) for clients on Wifi | Options:
| Yes |
Automatically select Blue Leader(s) if needed | Options:
| Yes |
| Setting | Description / Options | Editable |
|---|---|---|
Delivery Optimization mode | Options:
| Yes |
Automatically set group id (using Network Group Id) | Options:
| Yes |
Disable P2P on WiFi networks | Options:
| Yes |
Enable DNS-SD for peer discovery | Options:
| Yes |
Disable Teredo responses to multicast | Options:
| Yes |
Randomize fallback times to randomize start times | Options:
| Yes |
Force low RAM machines to use P2P | Options:
| Yes |
Manage cache sized | Options:
| Yes |
Cache options set (change via WMI) | 10 GB for disks 128 GB and less, 10% for 250-500 and 50 GB for 480+ | No |
Allow small files to peer to peer | Options:
| Yes |
Configure maximum cache age | Options:
| Yes |
Configure minimum background QoS for more P2P | Options:
| Yes |
Delay foreground download from http for more P2P | Options:
| Yes |
Delay background download from http for more P2P | Options:
| Yes |
Delay Cache Server fallback foreground for more P2P | Options:
| Yes |
Delay Cache Server fallback Background for more P2P | Options:
| Yes |
