POC Objectives and Prerequisites
The objective for a StifleR POC is to demonstrate how StifleR can enhance and extend Microsoft's BranchCache, Delivery Optimization, and BITS technologies with the goal of reducing WAN utilization and maximize peer-to-peer content delivery.
It’s important that the POC is driven from clear requirements. These requirements should be clearly defined and include test plans for validation.
Prerequisites
We recommend that all testing of 2Pint Software components should be installed and verified in a separate lab environment before implemented in a production environment. Once tested and verified in the lab, in can then be tested in the production environment. If a test lab is unavailable, the POC can be executed in a production environment in a controlled manner.
StifleR Server
Prepare a suitable server to act as the StifleR Server. If testing in a small lab, this can be any server for the purposes of testing as the load will be very light. If implementing in a production environment, check out the StifleR Server Considerations page for sizing information.
Lab Testing
In order to complete a POC deployment of 2Pint StifleR in a lab environment, you will need the following depending on whether you will be testing with Intune and/or Configuration Manager:
A functioning Intune instance with several applications that can be used for testing purposes. Ideally no less than 500Mb in size (1GB recommended).
Two or more client PC systems registered with Intune:
Ideally these clients should reside on separate subnets than one another.
It is recommended that some clients should reside on a subnet or two which have slower connectivity to an Internet gateway.
Production Environment Testing
In order to complete a POC deployment of 2Pint StifleR in a production environment, you will need to consider the following depending on whether you will be testing with Intune and/or Configuration Manager:
A functioning Intune instance with several applications that can be used for testing purposes. Ideally no less than 500Mb in size (1GB recommended).
Two or more client PC systems registered with Intune:
Ideally these clients should reside on separate subnets than one another.
It is recommended that some clients should reside on a subnet or two which have slower connectivity to an Internet gateway.
Last updated